2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna

2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna

YOU
SAVE US $6.81

  • Original PriceUS$35.80piece
  • SAVEUS $6.81piece
  • Discount PriceUS$28.99piece
  • ShippingFree Shipping
  • Product Rating7650
2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna
2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna
US$30.79US$28.99~30.79
Geekcreit® 0.96 Inch 4Pin White IIC I2C OLED Display Module 12864 LED For Arduino
Geekcreit® 0.96 Inch 4Pin White IIC I2C OLED Display Module 12864 LED For Arduino
US$5.26US$3.29~6.99
Geekcreit® IIC I2C 2004 204 20 x 4 Character LCD Display Screen Module Blue For Arduino
Geekcreit® IIC I2C 2004 204 20 x 4 Character LCD Display Screen Module Blue For Arduino
US$7.09US$7.09~8.96
Geekcreit® IIC / I2C 1602 Blue Backlight LCD Display Screen Module For Arduino
Geekcreit® IIC / I2C 1602 Blue Backlight LCD Display Screen Module For Arduino
US$4.41US$2.89~5.99
2.8 Inch ILI9341 240x320 SPI TFT LCD Display Touch Panel SPI Serial Port Module
2.8 Inch ILI9341 240x320 SPI TFT LCD Display Touch Panel SPI Serial Port Module
US$11.49US$9.49~11.49
Geekcreit® 1.3 Inch 4Pin White OLED LCD Display 12864 IIC I2C Interface Module For Arduino
Geekcreit® 1.3 Inch 4Pin White OLED LCD Display 12864 IIC I2C Interface Module For Arduino
US$9.53US$5.99~9.99
Geekcreit® 0.96 Inch 7Pin HD Color IPS Screen TFT LCD Display SPI ST7735 Module For Arduino
Geekcreit® 0.96 Inch 7Pin HD Color IPS Screen TFT LCD Display SPI ST7735 Module For Arduino
US$6.52US$4.29~8.25
Geekcreit® 2.8 Inch TFT LCD Shield Touch Display Screen Module For Arduino
Geekcreit® 2.8 Inch TFT LCD Shield Touch Display Screen Module For Arduino
US$12.59US$7.99~12.59
Geekcreit® 0.95 Inch 7pin Full Color 65K Color SSD1331 SPI OLED Display For Arduino
Geekcreit® 0.95 Inch 7pin Full Color 65K Color SSD1331 SPI OLED Display For Arduino
US$11.66US$7.49~11.66
100A LCD Display Digital Double Pulse Encoder Spot Welder Welding Machine Transformer Controller Board Time Control Module
100A LCD Display Digital Double Pulse Encoder Spot Welder Welding Machine Transformer Controller Board Time Control Module
US$26.00US$26.00
Geekcreit® 3.2 Inch ILI9341 TFT LCD Display Module Touch Panel For Arduino
Geekcreit® 3.2 Inch ILI9341 TFT LCD Display Module Touch Panel For Arduino
US$15.99US$12.99
TTGO 16M bytes (128M Bit) Pro ESP32 OLED V2.0 Display WiFi +bluetooth ESP-32 ESP8266 Module For Arduino
TTGO 16M bytes (128M Bit) Pro ESP32 OLED V2.0 Display WiFi +bluetooth ESP-32 ESP8266 Module For Arduino
US$12.39US$11.99~12.39
3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560
3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560
US$11.94US$8.49
3Pcs MAX7219 Dot Matrix Module 4-in-1 Display Screen For Arduino
3Pcs MAX7219 Dot Matrix Module 4-in-1 Display Screen For Arduino
US$16.32US$16.32~19.32
Geekcreit® 7Pin 0.96 Inch OLED Display 12864 SSD1306 SPI IIC Serial LCD Screen Module For Arduino
Geekcreit® 7Pin 0.96 Inch OLED Display 12864 SSD1306 SPI IIC Serial LCD Screen Module For Arduino
US$5.86US$5.86~6.16
Geekcreit® 0.91 Inch 128x32 IIC I2C Blue OLED LCD Display DIY Oled Module SSD1306 Driver IC DC 3.3V 5V For Arduino PIC
Geekcreit® 0.91 Inch 128x32 IIC I2C Blue OLED LCD Display DIY Oled Module SSD1306 Driver IC DC 3.3V 5V For Arduino PIC
US$5.26US$5.26~6.99
Keypad Shield Blue Backlight For Arduino Robot LCD 1602 Board
Keypad Shield Blue Backlight For Arduino Robot LCD 1602 Board
US$4.33US$4.33~5.90
5110 LCD Module White Backlight For Arduino
5110 LCD Module White Backlight For Arduino
US$4.19US$4.19~5.66
2.4 Inch TFT LCD Shield ILI9341 HX8347 240*320 Touch Board 65K RGB Color Display Module With Touch Pen For Arduino UNO
2.4 Inch TFT LCD Shield ILI9341 HX8347 240*320 Touch Board 65K RGB Color Display Module With Touch Pen For Arduino UNO
US$7.70US$7.23
1.8 Inch TFT LCD Display Module SPI Serial Port With 4 IO Driver
1.8 Inch TFT LCD Display Module SPI Serial Port With 4 IO Driver
US$6.31US$6.31~7.44

Shopping for a 2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna with lowest price? Read about features, types, and other must-know topics in our 2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna buying guide to make an informed choice. Order good 2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna Look for the 2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna package that is good for you. Make a price comparison, discount promo, or free sending before shopping.

Description:

The 868/915MHz antenna needs to be in connection with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip)
Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working. When using, pay attention to the positive and negative of the battery, otherwise it will be damaged!

With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin!
Note:This product does not include the battery.

Example:

This product is a SX1276 chip based on ESP32 WIFI increased OLED, namely LoRa remote modem, 868-915MHz frequency, high sensitivity is over-148dBm, + 20dBm output power, high reliability, long transmission distance.
the onboard 32MB Flash wi-fi antenna, 0.96 inch blue oled display, lithium battery charging circuit, CP2102 interface and USB serial chip, the perfect support for Arduino development environment, can be used for program checking and product development is very easy and fast.
Operating voltage: 3.3V to 7V
Operating temperature range: -40 ° C to + 90 ° C
Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct modes
Data rates: 150 Mbps @ 11n HT40., 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
receiver sensitivity up to -98 dBm
UDP sustained throughput of 135 Mbps

Pin diagram:

2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna

Test details:

2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna

Use legend:

2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna

For example One:

(1) 868mhz / 915MhzOLED LoRaSender
#include
#include
#include
#include "SSD1306.h"
#include "images.h"

#define SCK 5 // GPIO5 - SX1278's SCK
#define MISO 19 // GPIO19 - SX1278's MISO
#define MOSI 27 // GPIO27 - SX1278's MOSI
#define SS 18 // GPIO18 - SX1278's CS
#define RST 14 // GPIO14 - SX1278's RESET
#define DI0 26 // GPIO26 - SX1278's IRQ (interrupt request)
#define BAND 868E6 // 915E6

unsigned int counter = 0;

SSD1306 display (0x3c, 4, 15);
String rssi = "RSSI -";
String packSize = "-";
String packet;


void setup () {
pinMode (16, OUTPUT);
pinMode (2, OUTPUT);

digitalWrite (16, LOW); // set GPIO16 low to reset OLED
delay (50);
digitalWrite (16, HIGH); // while OLED is running, GPIO16 must go high

Serial.begin (9600);
while (! Serial);
Serial.println ();
Serial.println ("LoRa Sender Test");

SPI.begin (SCK, MISO, MOSI, SS);
LoRa.setPins (SS, RST, DI0);
if (! LoRa.begin (868)) {
Serial.println ("Starting LoRa failed!");
while (1);
}
//LoRa.onReceive(cbk);
// LoRa.receive ();
Serial.println ("init ok");
display.init ();
display.flipScreenVertically ();
display.setFont (ArialMT_Plain_10);
delay (1500);
}

void loop () {
display.clear ();
display.setTextAlignment (TEXT_ALIGN_LEFT);
display.setFont (ArialMT_Plain_10);

display.drawString (0, 0, "Sending packet:");
display.drawString (90, 0, String (counter));
display.display ();

// send packet
LoRa.beginPacket ();
LoRa.print ("hello");
LoRa.print (counter);
LoRa.endPacket ();

counter ++;
digitalWrite (2, HIGH); // turn the LED on (HIGH is the voltage level)
delay (1000); // wait for a second
digitalWrite (2, LOW); // turn the LED off by making the voltage LOW
delay (1000); // wait for a second
}



(2) 868mhz / 915Mhz OLED LoRaSender
#include
#include
#include
#include "SSD1306.h"
#include "images.h"

#define SCK 5 // GPIO5 - SX1278's SCK
#define MISO 19 // GPIO19 - SX1278's MISO
#define MOSI 27 // GPIO27 - SX1278's MOSI
#define SS 18 // GPIO18 - SX1278's CS
#define RST 14 // GPIO14 - SX1278's RESET
#define DI0 26 // GPIO26 - SX1278's IRQ (interrupt request)
#define BAND 868E6 // 915E6

SSD1306 display (0x3c, 4, 15);
String rssi = "RSSI -";
String packSize = "-";
String packet;



void loraData () {
display.clear ();
display.setTextAlignment (TEXT_ALIGN_LEFT);
display.setFont (ArialMT_Plain_10);
display.drawString (0, 15, "Received" + packSize + "bytes");
display.drawStringMaxWidth (0, 26, 128, packet);
display.drawString (0, 0, rssi);
display.display ();
}

void cbk (int packetSize) {
packet = "";
packSize = String (packetSize, DEC);
for (int i = 0; i rssi = "RSSI" + string (LoRa.packetRssi (), DEC);
loraData ();
}

void setup () {
pinMode (16, OUTPUT);
digitalWrite (16, LOW); // set GPIO16 low to reset OLED
delay (50);
digitalWrite (16, HIGH); // while OLED is running, GPIO16 must go high,

Serial.begin (9600);
while (! Serial);
Serial.println ();
Serial.println ("LoRa Receiver Callback");
SPI.begin (SCK, MISO, MOSI, SS);
LoRa.setPins (SS, RST, DI0);
if (! LoRa.begin (868E6)) {
Serial.println ("Starting LoRa failed!");
while (1);
}
//LoRa.onReceive(cbk);
LoRa.receive ();
Serial.println ("init ok");
display.init ();
display.flipScreenVertically ();
display.setFont (ArialMT_Plain_10);

delay (1500);
}

void loop () {
int packetSize = LoRa.parsePacket ();
if (packetSize) {cbk (packetSize); }
delay (10);
}

Package included:

2 x ESP32 LoRa OLED Module
2 x Line
4 x Pin
2 x 868/915m Spring Antenna


2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna


2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna


2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna


2Pcs Wemos® TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 Development Board Module With Antenna

Feedback
We would be very grateful to leave you some comments when you receive your article. We do our best to provide the best possible service, but if for any reason you are unhappy with something, please contact us before leaving a negative answer and we will do our best to solve your problem.

MERCI DE CHOISIR D'ACHETER AVEC NOUS